This section includes information about using AMD tools to customize and generate the subsystem in the AMD Vivado™ Design Suite.
The HDMI 1.4/2.0 TX Subsystem can be added to a Vivado IP integrator block design in the Vivado Design Suite and can be customized using IP catalog.
If you are customizing and generating
the subsystem in the
Vivado IP integrator, see
the
Vivado Design Suite User Guide: Designing
IP Subsystems using IP Integrator (UG994) for
detailed information. IP integrator might auto-compute certain
configuration values when validating or generating the design. To
check whether the values do change, see the description of the
parameter in this chapter. To view the parameter value, run the
validate_bd_design
command in the Tcl
console.
You can customize the IP for use in your design by specifying values for the various parameters associated with the IP subsystem using the following steps:
- In the Flow Navigator, click on Create Block Diagram or Open Block Design under the IP Integrator heading.
- Right-click in the diagram and select Add
IP.
A searchable IP catalog opens. You can also add IP by clicking on the Add IP button on the left side of the IP Integrator Block Design canvas.
- Click on the IP name and press the Enter key on your keyboard or double click on the IP name.
- Double-click the selected IP block or select the Customize Block command from the right-click menu.
For details, see the Vivado Design Suite User Guide: Designing with IP (UG896) and the Vivado Design Suite User Guide: Getting Started (UG910).
Figures in this chapter are illustrations of the Vivado IDE. The layout depicted here might vary from the current version.