Creating a Bootable Image and Program the Flash - 2022.1 English

Vitis Unified Software Platform Documentation: Embedded Software Development (UG1400)

Document ID
UG1400
Release Date
2022-04-26
Version
2022.1 English

An example XSCT session that demonstrates the creation of a "Hello World" application is shown in the following snippet. It also shows the creation of a bootable image using the applications along with bitstream by building the system project and programming the image onto the flash.

Note: The Vitis environment creates a platform project and system project when an application project is created. The platform project includes boot components such as FSBL, which are required for initializing a device. This example assumes that you are using the ZC702 board, and uses -flash_type qspi_single as an option with program_flash.
setws /tmp/wrk/workspace
app create -name a9_fsbl -hw /tmp/wrk/system.xsa -os standalone -proc ps7_cortexa9_0 -template {Hello World}
app build -name a9_hello
# Build the system project. This builds the platform project to generate fsbl.elf
# and creates a bif file and runs Bootgen to create a boot image (BOOT.BIN)
sysproj build -name a9_hello_system
# Modify the bif and run Bootgen if needed
# exec bootgen -arch zynq -image output.bif -w -o /tmp/wrk/BOOT.bin
# Program the flash and verify the flash device
exec program_flash -f /tmp/wrk/BOOT.bin -flash_type qspi_single -blank_check -verify -cable type xilinx_tcf url tcp:localhost:3121