SD1_3.0

VMK180 Evaluation Board User Guide (UG1411)
Document ID
UG1411
Release Date
2024-09-13
Revision
1.3 English

To boot from a SD card installed in microSD card socket J302:

  1. Store a valid XCVM1802 device boot image file on a microSD card. Plug the SD card into the VMK180 board SD socket J302 connected to the XCVM1802 U1 bank 501 MIO SD interface.
  2. Set boot MODE SW1 for SD1_3.0 as indicated in the "Mode Switch SW1 Configuration Option Settings" table in Versal Device Configuration.
  3. Power-cycle the VMK180 or press the POR pushbutton SW2. SW2 is callout 35 in the "Evaluation Board Component Locations" figure in Board Component Location.