Standard Peripherals - 2024.2 English

Versal Adaptive SoC Design Guide (UG1273)

Document ID
UG1273
Release Date
2024-11-20
Version
2024.2 English

Versal adaptive SoC standard I/O peripherals are located in the low-power domain (LPD) and in the PMC. The NoC must be configured to provide access to the DDR memory controller so that the peripherals with direct memory access (DMA) can access the DDR memory interfaces.

The following table shows the difference between the standard peripherals in Zynq UltraScale+ MPSoCs and Versal adaptive SoCs.

Table 1. Standard Peripherals Comparison
Peripheral Zynq UltraScale+ MPSoC Versal Adaptive SoC
CAN, CAN-FD 2 controllers with standard CAN 2 controllers with controller area network - flexible data rates (CAN-FD)
GEM 4 controllers 2 controllers with time-sensitive networking (TSN) feature
GPIO 1 controller 2 controllers
I2C 2 controllers 2 controllers in LPD (general purpose)

1 controller in PMC (general purpose)

NAND 1 controller N/A
PCIe (Gen1, Gen2) 1 controller N/A

PCIe (Gen3, Gen4)

1 controller Varies by device
SPI 2 controllers 2 controllers
SATA 1 controller N/A
UART 2 controllers with standard UART 2 controllers with Server Base System Architecture (SBSA)
USB (host, device, dual-role device) 2 USB 2.0/3.0 controllers 1 USB 2.0 controller