Step 5: Hardware Validation - 2023.1 English

Vivado Design Suite Tutorial: Dynamic Function eXchange (UG947)

Document ID
UG947
Release Date
2023-05-24
Version
2023.1 English

Hardware validation and interaction with the ChipScope debug cores can be done via XSDB.

  1. Download the full PDI from a parent implementation and poll the GPIOs from the static region and rp1rm1. The GPIO from the static region is connected to a 32-bit down counter and rp1rm1 is connected to a 32-bit up counter.
    xsdb% targets
      1  Versal xcvc1902
         2  RPU (Reset)
            3  Cortex-R5 #0 (RPU PGE Reset)
            4  Cortex-R5 #1 (RPU PGE Reset)
         5  APU
            6  Cortex-A72 #0 (Power On Reset)
            7  Cortex-A72 #1 (Power On Reset)
         8  PPU
            9  MicroBlaze PPU (Sleeping)
        10  PSM
        11  PMC
        12  PL
    xsdb% ta 5
    xsdb% mrd -force 0x80210000
    80210000:   8FE925FD
    
    xsdb% mrd -force 0x80210000
    80210000:   8560E3C5
    
  2. Read the GPIO in rp1rm1 to find the values counting up.
    xsdb% mrd -force 0x80220000
    80220000:   54FFC5A1
    
    xsdb% mrd -force 0x80220000
    80220000:   5B4B7E91
    
  3. Observe the output of counters using ILAs in the static region and rp1rm1.
    • static region ILA

    • rp1rm1 ILA

  4. Enable the Decouple signal before downloading the partial PDI for rp1rm2, which contains the count_down_vio module.
    xsdb% mwr -force 0x80200000 0x01
    xsdb% mrd -force 0x80200000
    80200000:   00000001
    
  5. Download partial PDI for rp1rm2 (from either impl_std_child_1 or impl_abs_child_1) and release the Decouple signal.
    xsdb% mwr -force 0x80200000 0x00
    xsdb% mrd -force 0x80200000
    80200000:   00000000
    
  6. Observe the Down counter in rp1rm2.
    xsdb% mrd -force 0x80220000
    80220000:   6B5A4A7D
    
    xsdb% mrd -force 0x80220000
    80220000:   60EF29C0
    
  7. Observe the rp1rm2 Down counter using VIO in AMD Vivadoâ„¢ Hardware Manager.

  8. Enable the Decouple signal before downloading the partial PDI for rp1rm3.
    xsdb% mwr -force 0x80200000 0x01
    xsdb% mrd -force 0x80200000
    80200000:   00000001
    
  9. Once rp1rm3 partial PDI is downloaded, disable the Decouple signal.
    xsdb% mwr -force 0x80200000 0x00
    xsdb% mrd -force 0x80200000
    80200000:   00000000
    
  10. rp1rm3 has both up and down counters connected to two separate ILAs.
    xsdb% mrd -force 0x80220000
    80220000:   24776086
    
    xsdb% mrd -force 0x80220000
    80220000:   36D42755
    
    xsdb% mrd -force 0x80230000
    80230000:   A8B2F57F
    
    xsdb% mrd -force 0x80230000
    80230000:   9B470AEA
    
  11. Observe the outputs in ILAs.
    • Up Counter in rp1rm3

    • Down Counter in rp1rm3