- In the Flow navigator panel, under IP integrator, click the Create Block Design button to open the Create Block Design dialog box.
- Type the Design Name, as shown in the following figure.
The Block Design window opens, as shown in the following figure.
- Within the empty design, use either the Add IP button on
the design canvas, or right-click in the canvas, and select Add
IP.
A Search box opens to let you search for and select the MicroBlaze processor, as shown in the following figure.
When you select the MicroBlaze IP, the Vivado IP integrator adds the IP to the design, and a graphical representation of the processing system displays, as shown in the following figure.
Note: The Tcl command is as follows:create_bd_cell -type ip -vlnv xilinx.com:ip:microblaze:11.0 microblaze_0
- Double-click the MicroBlaze IP in the canvas to invoke the Re-customize IP process, which displays the Re-customize IP configuration page for the MicroBlaze processor, shown in the following figure.