The following table shows the revision history for this document.
| Section | Revision Summary |
|---|---|
| 05/23/2024 Version 1.2 | |
| General updates |
Updated links. Updated figure titles. |
| Step 2: Create the Vivado Design and Run Through Synthesis |
Clarified and added steps. Updated graphics. |
| Step 3: Enabling IDF |
Updated figure reference. Clarified steps. Updated code blocks. |
| Step 5: Floorplanning First Configuration | Reordered steps. |
| Step 7: Implement the First Configuration | Changed mb_dfx_controller_wrapper_routed_bb to mb_dfx_controller_wrapper_routed_bb.dcp. |
| Step 11: Creating Vitis Application to Load Partial Bitstreams |
Added directory name project_idf_dfx_zcu102. |
| 08/31/2022 Version 1.1 | |
| Updated throughout document | Updated instructions for new Block Design Container (BDC) flow; updated software version start range for Vivado and Vitis to 2021.1 for IDF+DFX with BDC, updated software terms to match latest version. |
| IDF + DFX | Updated Vivado code parameter. |
| Implementing the Example Design | Updated steps and figures to provide latest BDC instructions in sub-section Step 2: Create the Vivado Synthesis Design and Run Through Synthesis. Added new figure to Step 2(2); Moved figure from Step 2(7b) to Step 2(7c) and added new image to Step 2(7b); Replaced figures in Steps 3(1) and 3(2a); Replaced figure in Steps 5(3) and 5(4); Replaced figure in Step 11(23). |
| 06/30/2021 Version 1.0 | |
| Initial release. | N/A |