Hardware and Software Requirements

Isolation Design Flow + Dynamic Function eXchange Example Application Note (XAPP1361)

Document ID
XAPP1361
Release Date
2024-05-23
Revision
1.2 English

The following hardware and software are required for this application note:

  • AMD ZCU102 Evaluation Board (revision 1.0 or later, with production silicon)
  • AC to DC power adapter (12 VDC)
  • USB Type-A to Micro-B USB cable for UART communication
  • Secure Digital (SD-MMC) card ≤ 32 GB
  • AMD Vivado™ 2021.1 or later
    Note: This application note is verified against 2021.1, 2021.2, and 2022.1 versions.
  • Integrating AMD LogiCORE™ SEM IP. Refer to Integrating LogiCORE SEM IP in Zynq UltraScale+ Devices (XAPP1298) and the associated reference design files.
  • AMD Vitis™ unified software development platform 2021.1 or later.
    Note: Future versions of the Vitis unified software platform have not been verified with this application note.
  • Serial communication terminal application (Tera Term or PuTTY)
  • Required associated reference design files that can be downloaded from the AMD website.