Reactive Ports for the AXI Slave VIP - 1.1 English

AXI Verification IP LogiCORE IP Product Guide (PG267)
Document ID
PG267
Release Date
2024-06-07
Version
1.1 English

The AXI slave VIP has two agents, which are axi_slv_agent and axi_slv_mem_agent. If you want to generate your own traffic, use the axi_slv_agent and get_rd_reactive. The axi_slv_mem_agent has its own method of generating traffic.

The best technique is to place the read response that is shown in the example design simset sim_all_config. The procedure is shown here:

  1. In the read driver of the slave agent, use the get_rd_reactive to receive the read command,
  2. Fill in the transaction read data information and send it back to the AXI slave VIP interface. Because both the get_rd_reactive and send are blocking, they have to be included in the initial and forever blocks without any blocking events. See the following code example: 
    //slave VIP agent gets read transaction cmd information, fill in data information and send it back to Slave VIP interface
  initial begin
    forever begin
      slv_agent.rd_driver.get_rd_reactive(rd_reactive);
      fill_payload(rd_reactive);
      fill_ruser(rd_reactive);
      fill_beat_delay(rd_reactive);
      slv_agent.rd_driver.send(rd_reactive);
    end  
  end