The following figure shows the AXI VIP Vivado IDE Basic Settings tab configuration screen.
Figure 1. AXI VIP Customize IP – Basic Settings Tab
For the runtime parameter descriptions, see Table 1.
- Component Name
- The component name is used as the base name of output files generated for the module. Names must begin with a letter and must be composed of characters: a to z, 0 to 9, and "_".
- Interface Mode
- Controls the mode of protocol to be configured as master, slave, or pass-through.
- Protocol
- Selects the specific AXI protocol.
- Read_Write Mode
- Enables the AXI read or write mode.
- Address Width
- Selects the address width. Default at 32.
- Data Width
- Selects the data width. Default at 32.
- ID Width
- Selects the ID width. Default at 0.
- User Signal Widths
- Selects the width for each user signal. Default at 0.