ungroup_bd_cells - 2022.1 English

Vivado Design Suite Tcl Command Reference Guide (UG835)

Document ID
UG835
Release Date
2022-05-05
Version
2022.1 English

Move the group of cells inside a hierarchy cell to its parent cell, and then remove the hierarchical cell. The connections between these cells are maintained; the connections between these cells and other cells are maintained through crossing hierarchy cell.

Syntax

ungroup_bd_cells [‑prefix <arg>] [‑quiet] [‑verbose] [<cells>...]

Returns

0 if success.

Usage

Name Description
[-prefix] Prefix name to add to cells
[-quiet] Ignore command errors
[-verbose] Suspend message limits during command execution
[<cells>] Match engine names against cell names Default: *

Categories

IPIntegrator

Description

This command is intended to undo the grouping of IP integrator cells into a hierarchical module, by either the group_bd_cells or the move_bd_cells commands. The command moves the cells inside a selected hierarchical module up one level to the parent cell, and then removes the hierarchical module.

The connections between the selected cells are maintained. The connections between these cells and other cells are maintained automatically by removing unneeded subsystem ports and pins.

This command returns 0 if successful, or an error message if it fails.

Arguments

-prefix <arg> - (Optional) A prefix name to apply to any cells that are moved up one level in the hierarchy.

-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the set_msg_config command.

<cells> - (Required) A hierarchical module defined by the group_bd_cells or move_bd_cells commands. Only one hierarchical module can be specified for the command at one time.

Example

The following example:

ungroup_bd_cells -prefix up2_ [get_bd_cells myMod2]