Set or get current design.
Syntax
current_bd_design [‑quiet] [‑verbose] [<design>]
Returns
The current design object, "" if failed.
Usage
Name | Description |
---|---|
[-quiet]
|
Ignore command errors |
[-verbose]
|
Suspend message limits during command execution |
[<design>]
|
Name of current design to be set |
Categories
Description
Defines the current IP subsystem design for use with the IP integrator of the Vivado® Design Suite, or returns the name of the current design in the active project.
The current IP subsystem design and current IP subsystem instance are the target of most of the IP integrator Tcl commands and design changes made in the tool. The current IP subsystem instance can be defined using the current_bd_instance
command.
You can use the get_bd_designs
command to get a list of open IP subsystem designs in the active project.
load_features IPIntegrator
help -category IPintegrator
load_features
command is only needed if the IP integrator is not currently loaded in the Vivado Design Suite.Arguments
-quiet
- (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
-verbose
- (Optional) Temporarily override any message limits and return all messages from this command.
set_msg_config
command.<design> - (Optional) The name of an IP subsystem design to set as the current design in the IP integrator. If a <design> is not specified, the command returns the current IP subsystem design of the active project.
Examples
current_bd_design design_1