current_board - 2022.1 English

Vivado Design Suite Tcl Command Reference Guide (UG835)

Document ID
UG835
Release Date
2022-05-05
Version
2022.1 English

Get the current board object

Syntax

current_board [‑quiet] [‑verbose]

Returns

Current board object.

Usage

Name Description
[-quiet] Ignore command errors
[-verbose] Suspend message limits during command execution

Categories

Object, Board

Description

Returns the board in use in the current project.

The board file, board.xml located in the data/boards folder of the Vivado® Design Suite installation area, stores information regarding board attributes. The board provides a representation of the overall system that the Xilinx® device is a part of, and can help define key aspects of the design, such as clock constraints, I/O port assignments, and supported interfaces. You can create custom boards by defining a custom Board Interface file, as described in the Vivado Design Suite User Guide: System-Level Design Entry (UG895).

The board can be specified:
  • When the project is created by selecting Boards from the Default Part dialog box.
  • By setting the BOARD_PART property on the current project as shown in the example.
  • By selecting the Project Device in the Settings dialog box in an open project in the Vivado IDE.
Refer to the Vivado Design Suite User Guide: System-Level Design Entry (UG895) for information on creating projects, and on configuring project settings.
Important: When you specify the board with the set_property command, the target part is also changed to match the part required by the specified BOARD property.

The current_board command returns the Vendor:Board_Name:File_Version attributes of the current board, as defined in the BOARD_PART property. The command returns nothing when the project targets a Xilinx FPGA instead of a TRD and board, or when the BOARD_PART property has not been defined. The command returns an error if it fails.

Arguments

-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the set_msg_config command.

Example

The following example sets the BOARD property for the current project, then reports the board in use by the project:
set_property BOARD_PART xilinx.com:kc705:1.0 [current_project]
current_board
   xilinx.com:kintex7:kc705:1.0
This example shows the results of setting the BOARD_PART property, causing the target part to be changed as a result. The target part, as defined in the PART property, is changed automatically, and a warning is returned:
set_property BOARD_PART xilinx.com:ac701:1.0 [current_project]
   WARNING: [Project 1-153] The current project part 'xc7k325tffg900-2' does
   not match with the 'XILINX.COM:AC701:1.0' board part settings. The project
   part will be reset to 'XILINX.COM:AC701:1.0' board part.
Note: You can use the report_property command to check the BOARD_PART and PART property on the current_project to see the changes.