get_bd_regs - 2022.1 English

Description

Get a list of registers using the objects of address segments, interface pins, and external interface ports. The register objects will provide the register's display name and the memory offset address. There is no default behavior for this command as it requires the use of -of_objects argument with a valid value that is an object of the address segments, interface pins, or external interface ports. The command will get the registers directly from the address segment objects or from address segments associated with the specified interface pin or interface port objects.

Arguments

-of_objects <args> - (Required) The argument value is an object of address segments, interface pins, or external interface ports as returned by the get_bd_addr_segs, get_bd_intf_pins, or get_bd_intf_ports commands. If the object is an address segment, the command will get the registers directly associated with the segment. If the object is either an interface pin or external interface port, the command will find the associated address segments and obtain the registers from those segments.

Examples

% create_bd_cell -type ip -vlnv xilinx.com:ip:axi_gpio:2.0 axi_gpio_0
% make_bd_intf_pins_external  [get_bd_intf_pins axi_gpio_0/S_AXI]
% assign_bd_address
% get_bd_addr_segs
/axi_gpio_0/S_AXI/Reg /S_AXI_0/SEG_axi_gpio_0_Reg
% set seg [get_bd_addr_segs /axi_gpio_0/S_AXI/Reg]
/axi_gpio_0/S_AXI/Reg
% get_bd_regs -of_objects $seg
GPIO_DATA GPIO_TRI GPIO2_DATA GPIO2_TRI GIER IP_IER IP_ISR
%set regs [get_bd_regs -of_objects $seg]
GPIO_DATA GPIO_TRI GPIO2_DATA GPIO2_TRI GIER IP_IER IP_ISR
% set reg [lindex $regs 0]
GPIO_DATA
% report_property $reg
Property     Type    Read-only  Visible  Value
CLASS        string  true       true     bd_reg
DISPLAYNAME  string  true       true     Channel_1_GPIO_DATA
NAME         string  true       true     GPIO_DATA
OFFSET       string  true       true     0x0

See Also

• get_bd_addr_segs
• get_bd_intf_pins
• get_bd_intf_ports
• report_property