connect_bd_net - 2022.1 English

Vivado Design Suite Tcl Command Reference Guide (UG835)

Document ID
UG835
Release Date
2022-05-05
Version
2022.1 English

Connect port and pin object list.

Syntax

connect_bd_net [‑net <arg>] [‑boundary_type <arg>] [‑quiet] [‑verbose]
    <objects>...

Returns

TCL_OK, TCL_ERROR if failed.

Usage

Name Description
[-net] The single net that all objects connect to
[-boundary_type] Used when source object is on a hierarchical block's pin. Valid values are 'upper', 'lower', or 'both'. If 'lower' boundary, searches from the lower level of hierarchy onwards. Default: both
[-quiet] Ignore command errors
[-verbose] Suspend message limits during command execution
<objects> The objects connect to the net

Categories

IPIntegrator

Description

Create a new net in the current IP integrator subsystem design connecting the specified list of block diagram port and pin objects, or connect an existing net to the specified pins and ports.

If the -net option is not specified, a new net is created connecting the listed objects. If -net is used, the specified net is either connected or created as needed.

Use the get_bd_ports and get_bd_pins commands to specify the port and pin objects to connect.

You can use this command to connect pins or ports at different levels of the subsystem design hierarchy. However, in this case, you cannot specify the -net option because the connection, when complete, will result in multiple nets rather than a single net.

The command returns the connected IP integrator subsystem design net object, or returns an error.

Arguments

-net <arg> - (Optional) Create a single net in the current IP subsystem design.
Note: The -net argument is optional. When the objects being connected are not in the same level of hierarchy, the net argument should not be specified.

-boundary_type [ lower | upper | both ] - (Optional) Specifies the search area for making a connection to a pin of an hierarchical block. The default of both searches the current level of the block design hierarchy, and downward, to find connecting objects. Specify upper to search only the current level of hierarchy, specify lower to search from the bottom of the hierarchy upward.

-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the set_msg_config command.

<objects> - Connect the specified list of port and pin objects in the current IP integrator subsystem design.

Examples

The following example connects two pins on different levels of the IP subsystem design hierarchy:
connect_bd_net [get_bd_pins /vidOut_1/locked] \
   [get_bd_pins /newMod1/bridge_1/fid]
Note: Because /vidOut_1/locked and /newMod1/bridge_1/fid are in different levels of the subsystem design hierarchy, the -net option is not specified. In this case, multiple nets are created for connection across the hierarchy.