Open a Vivado project file (.xpr)
Syntax
open_project [‑part <arg>] [‑read_only] [‑quiet] [‑verbose] <file>
Returns
Opened project object.
Usage
Name | Description |
---|---|
[-part]
|
Open the project using this part (overrides project's part) |
[-read_only]
|
Open the project in read-only mode |
[-quiet]
|
Ignore command errors |
[-verbose]
|
Suspend message limits during command execution |
<file>
|
Project file to be read |
Categories
Description
Opens the specified Vivado® Design Suite project file (.xpr), or the project file for the Vivado Lab Edition (.lpr).
Important: The
open_project
command has a different command syntax in the Vivado Lab Edition. The -part
option is not supported because the Vivado Lab Edition project (.lpr) does not specify a target part. The current_hw_target
and current_hw_device
commands determine the target part.This command returns a transcript of its process and the name of the created project, or returns an error if it fails.
Arguments
-part <arg>
- (Optional) Specify a target part to use when opening the project. This option lets you change the speed grade of the part used by a saved project, or change early availability parts for production parts of the same device and package. This option is not supported in Vivado Lab Edition.
Important: The use of
-part
is limited in terms of the range of parts that can be used, and can result in an error when opening the project if an incompatible part is specified.
-read_only
- (Optional) Open the project in read only mode. You will not be able to save any modifications to the project unless you use the save_project_as
command to save the project to a new editable project.
-quiet
- (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose
- (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the
set_msg_config
command.
<file>
- (Required) The project file to open. You must include both the path to the file and the .xpr file extension.
Examples
The following example opens the project named my_project1 located in the Designs directory.
open_project C:/Designs/project1.xpr
Note: The project must be specified with the .xpr extension for the tool to recognize it as a project file. The path to the file must be specified along with the project file name or the tool will return an error that it cannot find the specified file.