get_board_component_interfaces - 2021.2 English

Vivado Design Suite Tcl Command Reference Guide (UG835)

Document ID
UG835
Release Date
2021-10-22
Version
2021.2 English

Gets the list of interfaces in the board components that implement busdef specified by VLNV

Syntax

get_board_component_interfaces [‑regexp] [‑nocase] [‑all] [‑filter <arg>]
    [‑of_objects <args>] [‑quiet] [‑verbose] [<patterns>...]

Returns

List of bus interfaces.

Usage

Name Description
[-regexp] Patterns are full regular expressions
[-nocase] Perform case-insensitive matching
[-all] Returns all enabled as well as disabled interfaces
[-filter] Filter list with expression
[-of_objects] Get 'board_component_interface' objects of these types: 'board board_component'.
[-quiet] Ignore command errors
[-verbose] Suspend message limits during command execution
[<patterns>] Match Bus Interface names against patterns Default: * Values: The default search pattern is the wildcard *, or .* when -regexp is specified.

Categories

Object, Board

Description

Gets a list of interfaces defined on the components found on the current board, as defined in the Board Interface file.

The board file, board.xml located in the data/boards folder of the Vivado Design Suite installation area, stores information regarding board attributes. The board provides a representation of the overall system that the Xilinx device is a part of, and can help define key aspects of the design, such as clock constraints, I/O port assignments, defined components and supported interfaces. You can create custom boards by defining a custom Board Interface file, as described in the Vivado Design Suite User Guide: System-Level Design Entry (UG895).

The component interface defines related groups of signals that are found on a component, or a component mode.

This command returns a list of component interfaces, or returns an error if it fails.

Arguments

-regexp - (Optional) Specifies that the search <patterns> are written as regular expressions. Both search <patterns> and -filter expressions must be written as regular expressions when this argument is used. Xilinx regular expression Tcl commands are always anchored to the start of the search string. You can add ".*" to the beginning or end of a search string to widen the search to include a substring. See http://perldoc.perl.org/perlre.html for help with regular expression syntax.
Note: The Tcl built-in command regexp is not anchored, and works as a standard Tcl command. For more information refer to http://www.tcl.tk/man/tcl8.5/TclCmd/regexp.htm.

-nocase - (Optional) Perform case-insensitive matching when a pattern has been specified. This argument applies to the use of -regexp only.

-all - (Optional) Return a list of all component interfaces defined in the Board Interface file of the current board.

-filter - (Optional) Filter the results list with the specified expression. The -filter argument filters the list of objects returned by get_board_component_interfaces based on property values on the component interfaces. You can find the properties on an object with the report_property or list_property commands. Any property/value pair can be used as a filter. In the case of the component interface object, "NAME" and "BUSDEF_NAME" are two of the properties that can be used to filter results.

The filter search pattern should be quoted to avoid having to escape special characters. String matching is case-sensitive and is always anchored to the start and to the end of the search string. The wildcard “*” character can be used at the beginning or at the end of a search string to widen the search to include a substring of the property value.
Note: The filter returns an object if a specified property exists on the object, and the specified pattern matches the property value on the object. In the case of the "*" wildcard character, this will match a property with a defined value of "".
For string comparison, the specific operators that can be used in filter expressions are "equal" (==), "not-equal" (!=), "match" (=~), and "not-match" (!~). Numeric comparison operators <, >, <=, and >= can also be used. Multiple filter expressions can be joined by AND and OR (&& and ||). The following gets input pins that do NOT contain the “RESET” substring within their name:
get_pins * -filter {DIRECTION == IN && NAME !~ "*RESET*"}
Boolean (bool) type properties can be directly evaluated in filter expressions as true or not true:
-filter {IS_PRIMITIVE && !IS_LOC_FIXED}

-of_objects <args> - (Optional) Get the component interfaces of the specified board, or board_component objects.

-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the set_msg_config command.

<patterns> - (Optional) Match component interfaces against the specified search patterns. The default pattern is the wildcard '*' which gets a list of all component interfaces defined on the current board.

Examples

The following example gets the component interfaces defined in the Board Interface file for the specified board component:
get_board_component_interfaces -of_objects [get_board_components *part0*]
The following example gets the component interfaces defined in the Board Interface file, and then uses that information to create interfaces in the current project:
#Get and Create Interfaces for I/O Ports
foreach x [get_board_component_interfaces] {
create_interface $x }