Get or set the current hardware device
Syntax
current_hw_device [‑quiet] [‑verbose] [<hw_device>]
Returns
Hardware device
Usage
Name | Description |
---|---|
[-quiet]
|
Ignore command errors |
[-verbose]
|
Suspend message limits during command execution |
[<hw_device>]
|
hardware device to set as current; optional |
Categories
Description
Set or return the current Xilinx FPGA targeted by the Hardware Manager in the Vivado Design Suite for programming and debug.
The hardware target is a system board containing a JTAG chain of one or more Xilinx devices that you can program with a bitstream file, or use to debug your design. Connections between hardware targets on the system board and the Vivado Design Suite are managed by the hw_server
application, and the connect_hw_server
command. Refer to Vivado Design Suite User Guide: Programming and Debugging (UG908) for a list of supported JTAG download cables and devices.
Each hardware target can have one or more Xilinx devices to program, or to use for debugging purposes. The current device is specified or returned by the current_hw_device
command.
-
open_hw
- Opens the Hardware Manager in the Vivado Design Suite. -
connect_hw_server
- Makes a connection to a local or remote Xilinx hardware server application. -
current_hw_target
- Defines the hardware target of the connected server. -
open_hw_target
- Opens a connection to the hardware target. -
current_hw_device
- Specifies the Xilinx FPGA to use for programming and debugging.
After connecting to the appropriate hardware device, you can program the device with a bitstream file using the program_hw_device
command, and debug the device using any of a number of Hardware Manager Tcl commands. To interactively debug the device open the Hardware Manager in the Vivado Design Suite IDE.
current_hw_server
, current_hw_target
, and current_hw_device
commands to set the hardware for programming and debugging the design. You should exercise care when using these commands to insure that the current server, target, and device are in sync. The current device should be found on the current target, which should be found on the current server.This command returns the current hardware device as an object, or returns an error if it fails.
Arguments
-quiet
- (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
-verbose
- (Optional) Temporarily override any message limits and return all messages from this command.
set_msg_config
command.<hw_device> - (Optional) Specify the hw_device object to set as the current device for programming and debug. The hw_device must be specified as an object as returned by the get_hw_devices
command. If the hardware device is not specified, the current_hw_device
will be returned.
Example
current_hw_device
current_hw_device
object, then sets the PROGRAM.FILE property for the device, and programs the device:
current_hw_device [lindex [get_hw_devices] 0]
set_property PROGRAM.FILE {C:/Data/design.bit} [current_hw_device]
program_hw_devices [current_hw_device]