Get or set the current hardware ILA data
Syntax
current_hw_ila_data [‑quiet] [‑verbose] [<hw_ila_data>]
Returns
Hardware ILA data.
Usage
Name | Description |
---|---|
[-quiet]
|
Ignore command errors |
[-verbose]
|
Suspend message limits during command execution |
[<hw_ila_data>]
|
hardware ILA data |
Categories
Description
Set or return the current ILA debug core data object.
The ILA data object is created in the Vivado logic analyzer using the upload_hw_ila_data
command, or the read_hw_ila_data
command. By default, the current hw_ila_data object is the latest one created by the Vivado logic analyzer. The current_hw_ila_data
command can be used to change that object.
The ILA debug core captures sample data in real-time as the hardware device runs, based on the event triggers or capture conditions defined on the hw_ila object. The hw_ila object triggers on the hw_device are armed by the run_hw_ila
command.
The ILA data object can be displayed in the waveform window of the Vivado tools logic analyzer using the display_hw_ila_data
command. You can also write the ILA data to disk with the write_hw_ila_data
command to save the ILA debug information for later user and analysis.
This command returns the captured hardware ILA debug core data as an object, or returns an error if it fails.
Arguments
-quiet
- (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
-verbose
- (Optional) Temporarily override any message limits and return all messages from this command.
set_msg_config
command.<hw_ila_data> - (Optional) Specify the hw_ila_data object to set as the current data object for programming and debug. The hw_ila_data object must be specified as an object as returned by the get_hw_ila_datas
command. If the hardware ILA data is not specified, the current_hw_ila_data
object will be returned.
Example
current_hw_ila_data