Read hardware ILA data from a file
Syntax
read_hw_ila_data [‑quiet] [‑verbose] <file>
Returns
Name of the output file.
Usage
Name | Description |
---|---|
[-quiet]
|
Ignore command errors |
[-verbose]
|
Suspend message limits during command execution |
<file>
|
hardware ILA data file name |
Categories
Description
Read ILA debug core data from the specified file, and create an hw_ila_data object.
The ILA debug sample data is acquired from a running device using the upload_hw_ila_data
command. This creates a hw_ila_data object that can be written to a file on disk using the write_hw_ila_data
command. This command reads that ILA data file.
The hw_ila_data object that is created by read_hw_ila_data
is named after the <file>
it is read from. If a hw_ila_data
object of the same name already exists, the name of the object is assigned a number extension starting at 1: <file>_1
.
The new hw_ila_data object is not connected with, or associated with, any ILA debug cores in the design.
After being read from disk, the ILA debug data can be viewed in the waveform viewer of the Vivado logic analyzer by using the display_hw_ila_data
command.
This command returns an ILA data object, or returns an error if it fails.
Arguments
-quiet
- (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
-verbose
- (Optional) Temporarily override any message limits and return all messages from this command.
set_msg_config
command.<file>
- (Required) The name of ILA data file to read. If the file extension is not specified, the Vivado tool assumes an extension of .ila.
Example
read_hw_ila_data C:/Data/hw_ila_data_2.ila