[Figure 1, callout 24]
The ZCU216 board power switch is SW15. Sliding the switch actuator from the Off to On position applies 12V power from J50, a 6-pin mini-fit connector. Green LED (DS19) illuminates when the ZCU216 board power is On. See Board Power System for details on the on-board power system.
CAUTION:
Do NOT plug a PC ATX
power supply 6-pin connector into the ZCU216 board power connector J50. The ATX
6-pin connector has a different pinout than J50. Connecting an ATX 6-pin connector
into J50 damages the ZCU216 board and voids the board warranty.
The following figure shows the power connector J50, power switch SW2, and LED indicator DS19.
Figure 1. ZCU216 Power Input