Placing I/O Ports Sequentially - 2024.1 English

Vivado Design Suite User Guide: I/O and Clock Planning (UG899)

Document ID
UG899
Release Date
2024-05-30
Version
2024.1 English
To place I/O ports sequentially:
  1. In the I/O Ports window, select an individual I/O port, a group of I/O ports, or interfaces.
  2. Use one of the following commands:
    • In the I/O Ports window, right-click, and select Place I/O Ports Sequentially.
    • In either the Package window or the Device window, right-click, and select Place I/O Ports Sequentially.

    The first I/O port in the group is attached to the cursor when you move it over a package pin or I/O pad. A tooltip displays the I/O port and package pin names.

  3. To assign an I/O port, click a pin or a pad.

    If you select more I/O ports, the command is continued. The cursor drags the subsequent I/O ports until all of the I/O ports are placed, or you press Esc.

    Tip: The Vivado IDE assigns ports in the order that they appear in the I/O Ports window. You can adjust the assignment order by applying sorting techniques in the I/O Ports window prior to assignment.