SD1_3.0

VCK190 Evaluation Board User Guide (UG1366)
Document ID
UG1366
Release Date
2023-03-17
Revision
1.1 English

To boot from a SD card installed in microSD card socket J302:

  1. Store a valid XCVC1902 ACAP boot image file on a microSD card. Plug the SD card into the VCK190 board SD socket J302 connected to the XCVC1902 U1 bank 501 MIO SD interface.
  2. Set boot MODE SW1 for SD1_3.0 as indicated in the "Mode Switch SW1 Configuration Option Settings" table in Versal ACAP Configuration.
  3. Power-cycle the VCK190 or press the POR pushbutton SW2. SW2 is callout 35 in the "Evaluation Board Component Locations" figure in Board Component Location.