User Parameters - 2.0 English

Versal Adaptive SoC GT Controller for DisplayPort and SDI LogiCORE IP Product Guide (PG398)

Document ID: PG398
Release Date: 2024-06-05
Version: 2.0 English

The following table shows the relationship between the fields in the AMD Vivado™ IDE and the user parameters (which can be viewed in the Tcl Console).

Table 1. User Parameters
Vivado IDE Parameter ¹	User Parameter	Default Value
Component_Name
Style	`c_new_dp`	1
Protocol	`c_protocol`	DP
Enable TX	`c_enable_tx`	True
Enable RX	`c_enable_rx`	True
Number of TX Lanes	`c_tx_num_ch`	4
Number of RX Lanes	`c_rx_num_ch`	4
Max Line Rate of TX	`c_tx_rate`	2.7
Max Line Rate of RX	`c_rx_rate`	2.7
PICXO	`c_picxo`	DISABLE
TX PLL	`c_tx_pll`	RPLL
RX PLL	`c_rx_pll`	LCPLL
Enable AXI4-Lite Interface	`c_use_axilite`	FALSE
Use Master Reset scheme for GT	`c_use_mstr`	TRUE
Parameter values are listed in the table where the Vivado IDE parameter value differs from the user parameter value. Such values are shown in this table as indented below the associated parameter.