| 0 |
Used in Duplex and RX only mode. If set to 1, indicates that LCPLL
has been locked. |
| 1 |
Used in Duplex and RX only mode. If set to 1, indicates that channel
0 RX reset was synced. |
| 2 |
Used in Duplex and RX only mode. If set to 1, indicates that RX
changes was applied. |
| 3 |
Used in Duplex and RX only mode. RX fabric reset. |
| 4 |
Used in Duplex and RX only mode. RX modes locked. |
| 5 |
Used in Duplex and RX only mode. If set to 1, indicates that received
data is level B. |
| 6 |
Reserved. |
| 7 |
Used in Duplex and RX only mode. Receiver clock enable
signal. |
| 10:8 |
Used in Duplex and RX only mode. Receiver Mode information. |
| 11 |
Used in Duplex or TX only mode. If set to 1, indicates that RPLL has
been locked. |
| 12 |
Used in Duplex or TX only mode. If set to 1, indicates that channel 0
TX reset done has been synced. |
| 13 |
Used in Duplex or TX only mode. If set to 1, indicates that TX
changes is applied. |
| 14 |
Used in Duplex or TX only mode. Transmitter fabric reset. |
| 15 |
Reserved. |