The following features of the standard are not supported in the core:
- The GT Controller for DisplayPort and SDI IP supports GTYE5 and GTYP GT type. All other GT types of Versal device are not supported.
- The phase interpolator controlled crystal (PICXO) or FRACXO mode can only
be supported for use cases where the
tx_clkout
andrx_clkout
frequency from a GT Quad are the same. It therefore cannot be used for RX only or TX only configurations. - Ensure that the rate grouping feature is enabled only for SDI use-cases
with more than three links per QUAD and also requires individual GT reference clock support
for TX and RX. The
Rx_bit_rate
signal is also not supported when rate grouping feature is enabled. - SD-SDI is not supported for versions 2023.2 and older.