The following table shows the Link Training ports.
| Port Name | I/O | Description | Clock Domain |
|---|---|---|---|
| ctl_lt_training_enable | I | Enables link training. When link training is disabled, all PCS lanes function in mission mode. | tx_serdes_clk |
| ctl_lt_restart_training | I | This signal triggers a restart of link training regardless of the current state. | tx_serdes_clk |
| ctl_lt_rx_trained | I | This signal is asserted to indicate that the receiver finite impulse response (FIR) filter coefficients have all been set, and that the receiver portion of training is complete. | tx_serdes_clk |
|
stat_lt_signal_detect |
O | This signal indicates when the respective link training state machine has entered the SEND_DATA state, in which normal PCS operation can resume. | tx_serdes_clk |
|
stat_lt_training |
O | This signal indicates when the respective link training state machine is performing link training. | tx_serdes_clk |
|
stat_lt_training_fail |
O | This signal is asserted during link training if the corresponding link training state machine detects a time-out during the training period. | tx_serdes_clk |
|
stat_lt_frame_lock |
O | When link training has begun, these signals are asserted, for each physical medium dependent (PMD) lane, when the corresponding link training receiver is able to establish a frame synchronization with the link partner. | rx_serdes_clk |
|
stat_lt_preset_from_rx |
O | This signal reflects the value of the preset control bit received in the control block from the link partner. | rx_serdes_clk |
|
stat_lt_initialize_from_rx |
O | This signal reflects the value of the initialize control bit received in the control block from the link partner. | rx_serdes_clk |
| stat_lt_k_p1_from_rx0[1:0] | O | This 2-bit field indicates the update control bits for the k+1 coefficient, as received from the link partner in the control block. | rx_serdes_clk |
| stat_lt_k0_from_rx0[1:0] | O | This 2-bit field indicates the update control bits for the k0 coefficient, as received from the link partner in the control block. | rx_serdes_clk |
| stat_lt_k_m1_from_rx0[1:0] | O | This 2-bit field indicates the update control bits for the k-1 coefficient, as received from the link partner in the control block. | rx_serdes_clk |
| stat_lt_stat_p1_from_rx0[1:0] | O | This 2-bit field indicates the update status bits for the k+1 coefficient, as received from the link partner in the status block. | rx_serdes_clk |
| stat_lt_stat0_from_rx0[1:0] | O | This 2-bit field indicates the update status bits for the k0 coefficient, as received from the link partner in the status block. | rx_serdes_clk |
| stat_lt_stat_m1_from_rx0[1:0] | O | This 2-bit field indicates the update status bits for the k-1 coefficient, as received from the link partner in the status block. | rx_serdes_clk |
| ctl_lt_pseudo_seed0[10:0] | I | This 11-bit signal seeds the training pattern generator. | tx_serdes_clk |
|
ctl_lt_preset_to_tx |
I | This signal is used to set the value of the preset bit that is transmitted to the link partner in the control block of the training frame. | tx_serdes_clk |
|
ctl_lt_initialize_to_tx |
I | This signal is used to set the value of the initialize bit that is transmitted to the link partner in the control block of the training frame. | tx_serdes_clk |
| ctl_lt_k_p1_to_tx0[1:0] | I | This 2-bit field is used to set the value of the k+1 coefficient update field that is transmitted to the link partner in the control block of the training frame. | tx_serdes_clk |
| ctl_lt_k0_to_tx0[1:0] | I | This 2-bit field is used to set the value of the k0 coefficient update field that is transmitted to the link partner in the control block of the training frame. | tx_serdes_clk |
| ctl_lt_k_m1_to_tx0[1:0] | I | This 2-bit field is used to set the value of the k-1 coefficient update field that is transmitted to the link partner in the control block of the training frame. | tx_serdes_clk |
| ctl_lt_stat_p1_to_tx0[1:0] | I | This 2-bit field is used to set the value of the k+1 coefficient update status that is transmitted to the link partner in the status block of the training frame. | tx_serdes_clk |
| ctl_lt_stat0_to_tx0[1:0] | I | This 2-bit field is used to set the value of the k0 coefficient update status that is transmitted to the link partner in the status block of the training frame. | tx_serdes_clk |
| ctl_lt_stat_m1_to_tx0[1:0] | I | This 2-bit field is used to set the value of the k-1 coefficient update status that is transmitted to the link partner in the status block of the training frame. | tx_serdes_clk |
| stat_lt_rx_sof[1-1:0] | O | This output is High for 1 RX SerDes clock cycle to indicate the start of the link training frame. | rx_serdes_clk |