Ensuring the Continuous Flow of Data and Data Reuse - 2021.1 English

Vitis High-Level Synthesis User Guide (UG1399)

Document ID
Release Date
2021.1 English

The key to implementing the convolution example reviewed in the previous section as a high-performance design with minimal resources is to consider how the FPGA implementation will be used in the overall system. The ideal behavior is to have the data samples constantly flow through the FPGA.

  • Maximize the flow of data through the system. Refrain from using any coding techniques or algorithm behavior which limits the flow of data.
  • Maximize the reuse of data. Use local caches to ensure there are no requirements to re-read data and the incoming data can keep flowing.

The first step is to ensure you perform optimal I/O operations into and out of the FPGA. The convolution algorithm is performed on an image. When data from an image is produced and consumed, it is transferred in a standard raster-scan manner as shown in the following figure.

Figure 1. Raster Scan Order

If the data is transferred from the CPU or system memory to the FPGA it will typically be transferred in this streaming manner. The data transferred from the FPGA back to the system should also be performed in this manner.