- Before implementing the project, you need to set the name for the output netlist file. By
default, the name of the output netlist file is
synplify_1.edf. To change the name of the output file,
type the following command at the Tcl command prompt:
%project -result_file "./rev_1/sinegen_demo.edf"You will use this file in Vivado® IDE.
- With all the settings in place, click the Run button in the left panel of the Synplify Pro window to
start synthesizing the design.
- During synthesis, status messages appear in the Tcl Script tab. Warning messages are expected, but there should not be any Error messages. To see detailed messages, click the Messages tab in the bottom left-hand corner of the Synplify Pro console.
- When synthesis completes, the output netlist is written to the file:
rev_1/sinegen_demo.edf
[Optional] To view the netlist select .
- Click to save the project, then click .