AMD Vitis™ HLS can be run from the GUI, as previously discussed, interactively from the command line, or in batch mode from a Tcl script. This section discusses running the tool interactively, or in batch mode.
Running Vitis HLS Interactively
You can launch Vitis HLS using the
-i
option to open the tool in interactive mode.
$ vitis_hls -i
vitis_hls>
help
command to get
a list of commands that you can use in this mode, as described in Vitis HLS Command Reference.vitis_hls> help
Help for any individual command is provided by using the command name
as an option to the help
command. For example, help for the
add_files
command can be returned with:
vitis_hls> help add_files
Vitis HLS also supports an auto-complete feature by pressing the tab key at any point when entering commands. The tool displays the possible matches based on typed characters to complete the command, or command option. Entering more characters improves the filtering of the possible matches.
Type the exit
or quit
command to quit Vitis HLS.
ls
command and the DOS dir
command is used to list the contents of a
directory. Linux paths in a Makefile expand into minGW paths. Therefore, in all
Makefile files you must put the path name in quotes to prevent any path
substitutions, for example FOO := ":/"
.Running Vitis HLS in Batch Mode
vitis_hls -f tcl_script.tcl
Commands embedded in the specified Tcl script are executed in the
specified sequence. If the Tcl script includes the exit
or quit
command, then the tool
exits at that point, completing the batch process. If the Tcl script does not end
with the exit
command, Vitis HLS returns to the command prompt, letting you continue
in interactive mode.
solution/script.tcl
file within the
project. You can use this script as a starting point for developing your own batch
scripts. An example script is provided
below:open_project dct
set_top dct
add_files ../dct_src/dct.cpp
add_files -tb ../dct_src/out.golden.dat -cflags "-Wno-unknown-pragmas" -csimflags "-Wno-unknown-pragmas"
add_files -tb ../dct_src/in.dat -cflags "-Wno-unknown-pragmas" -csimflags "-Wno-unknown-pragmas"
add_files -tb ../dct_src/dct_test.cpp -cflags "-Wno-unknown-pragmas" -csimflags "-Wno-unknown-pragmas"
open_solution "solution1" -flow_target vitis
set_part {xcvu11p-flga2577-1-e}
create_clock -period 10 -name default
source "./dct/solution1/directives.tcl"
csim_design
csynth_design
cosim_design
export_design -format ip_catalog
When opening a legacy AMD Vitis™ HLS project in Vitis HLS, you must specify the
-upgrade
or -reset
option.
-
-upgrade
will perform conversion of an AMD Vivado™ HLS project to a Vitis HLS project. -
-reset
will restore the project to its initial state.
open_project
command will return an error when
opening a Vitis HLS project unless the -upgrade
or -reset
option is
used.