Marking Nets for Debug in the Block Design - 2021.1 English

Vivado Design Suite User Guide: Designing IP Subsystems Using IP Integrator (UG994)

Document ID
UG994
Release Date
2021-06-16
Version
2021.1 English
  1. To mark nets for debug, in the block design:
    1. Highlight the net.
    2. Right-click and select Debug, as shown in the following figure.

      The nets that are marked for debug show a small bug icon placed on top of the net in the block design.

      Also, a bug icon is placed on the nets to be debugged in the Design window, as shown in the following figure.



  2. To mark multiple nets for debug at the same time:
    1. Highlight the nets together.
    2. Right-click, and select Mark Debug.