Run C/RTL Co-Simulation - 2023.2 English

1. Open the Config File editor, an select the C/RTL Co-Simulation category on the left side. The options for Co-simulation are displayed on the right.

2. Select enable_dataflow_profiling to turn on the feature.

3. Select enable_fifo_sizing to turn on this feature.

4. Select Run under C/RTL Co-Simulation in the Flow Navigator.

The DATAFLOW optimization is a dynamic optimization that can only really be understood after C/RTL co-simulation which provides needed performance data. After co-simulation the columns of the Process table are populated with values from the simulation results.