Connecting the Boards and Cables - 2021.2 English

Vivado Design Suite Tutorial: Programming and Debugging

Document ID
Release Date
2021.2 English
  1. Connect the Digilent cable from the Digilent cable connector to a USB port on your computer.
  2. Connect the two SMA cables (for lab 5 only) as follows:
    1. Connect one SMA cable from J19 (TXP) to J17 (RXP).
    2. Connect the other SMA cable from J20 (TXN) to J66 (RXN).

The relative locations of SMA cables on the board are shown in Setup Requirements.