Step 5: Viewing the Power Properties - 2021.1 English

Vivado Design Suite Tutorial: Power Analysis and Optimization (UG997)

Document ID
UG997
Release Date
2021-06-30
Version
2021.1 English

This step shows how you can get the display of static probability and toggle rate for a signal in property window.

  1. Note the total power (Total On-Chip Power) in the Power Report Summary view.
  2. Click the Set/Reset item in the Power Report.
  3. Click on the dut/dut_reset signal.

  4. Note that there is a Power view in the Net Properties window that displays net properties for the dut/dut_reset signal. Click on Load Power Properties to get the power information the first time.

  5. Note the Toggle rate is 0% and the Static probability is 0 for the dut/dut_reset signal, which indicates that reset is always deasserted in the design.