Step 2: Setting up the KCU105 Evaluation Board - 2021.1 English

Vivado Design Suite Tutorial: Power Analysis and Optimization (UG997)

Document ID
Release Date
2021.1 English
Important: This project is created for the KCU105 Rev B Evaluation Board. The pin constraints are set based on this Evaluation Board. If you are using any other Revisions, update the XDC file dut_fpga_kcu105.xdc with the correct pin constraints.
  1. Connect the Digilent cable (or platform USB Cable) for programming.
  2. Connect the MAXPOWERTOOL002# Interface Adapter to the PMBus port on the KCU105 Evaluation Board.
  3. Connect the power cable.

  4. Install the Maxim Digital Power Designer software on the PC from this location.