Step 4: Programming the Bitstream - 2021.1 English

Vivado Design Suite Tutorial: Power Analysis and Optimization (UG997)

Document ID
Release Date
2021.1 English
  1. In the Vivado Hardware Manager, click Open Target in the green alert bar and select Open New Target.
  2. In the Open New Hardware Target wizard, click Next to go to the Hardware Server Settings page.
  3. Select the server to which the board is connected.
    • If the board is connected to the local PC, select Local Server and click Next.
    • If you are connecting to a remote server, see Connecting to a Hardware Target Using hw_server in the Vivado Design Suite User Guide: Programming and Debugging (UG908) .

    When the hardware is detected successfully, the part information will be displayed in the Open New Hardware Target dialog box.

  4. Verify the part information, then click Next and Finish.

  5. In the Hardware Devices window, right-click the part and select Program Device.

  6. Select the bit file from the implementation runs directory of the project created in Lab 2 for the UltraScaleā„¢ design (<project_dir>/power_tutorial2/power_tutorial2.runs/impl_1/ dut_fpga.bit) and click Program.
  7. After the program completes successfully, select XADC (System Monitor) in the Hardware window, right-click and select Dashboard, and then select New Dashboard.

  8. Click OK. The System Monitor window opens and plots die temperature (junction temperature) in the Graph Window.