Step 2: Setting Up the KC705 Evaluation Board - 2021.1 English

Vivado Design Suite Tutorial: Power Analysis and Optimization (UG997)

Document ID
Release Date
2021.1 English
Important: This project is created for the KC705 Rev 1.0 Evaluation Board. The pin constraints are set based on this Evaluation Board. If you are using any other revisions, update the XDC file dut_fpga_kc705.xdc with the correct pin constraints.
  1. Connect the Digilent cable (or Platform USB Cable) for programming.
  2. Connect the TI USB Interface Adapter to the PMBus port on the KC705 Evaluation Board.
  3. Connect the Power cable.

  4. Install the TI Fusion Digital Power Designer software on the PC from this location.