Configure the Device via JTAG

Fast Partial Reconfiguration Over PCI Express (XAPP1338)

Document ID
Release Date
1.0 English
The initial configuration of the device can be achieved via JTAG or dual QSPI. To configure the device via JTAG, perform the following steps.
  1. If necessary, launch the Vivado IDE, and select Open Hardware Manager.
  2. Connect to the target board.
  3. Right-click the device (KU5P or VU9P), and select Program Device, which opens a dialog box.

  4. For Bitstream file, select design_1_wrapper.bit from the Bitstreams folder.
  5. For Debug probes file, select design_1_wrapper_shift_right.ltx.
  6. Click Program.

The result is that four LEDs shift to the right after DONE goes high.