There are four BSCAN Interfaces which are available to connect to any BSCAN capable PL Debug module, such as MicroBlaze Debug Module (MDM). The JTAG boundary scan chain is driven from the PMC TAP through all IO in the device. The BSCAN interfaces are connected to PMC Test Access Point (TAP) controller for Debug/boundary scan purpose.
Note: When a
MicroBlaze™
processor with a MicroBlaze Debug Module (MDM) is added to the design, the PL BSCAN1
interface will be automatically enabled and does not need to be enabled in the CIPS
IP.
Figure 1. BSCAN Configuration
