Get Available Resource Counts - 2022.1 English

Xilinx Power Estimator User Guide (UG440)

Document ID
UG440
Release Date
2022-04-26
Version
2022.1 English

The following named cells represent the maximum available resources available for the considered device and package. None of these cells are visible in the spreadsheet, however you can use these read only values in your calculations.

Table 1. Resource Counts - Named Cells
Resource Named Cells Description
LUTs NUM_LUTS Includes all LUTS
NUM_LUTRAM Shift Registers and Distributed Memories LUTs
Registers NUM_FFS  
DSP blocks NUM_DSPS  
Block RAMs NUM_BRAMS  
PLLs NUM_PLLS  
MMCMs NUM_MMCMS  
DCMs NUM_DCMS  
Transceivers NUM_GTPS Lowest speed blocks
NUM_GTS Lower speed blocks
NUM_GTHS High Speed blocks
NUM_GTZS Highest Speed blocks
Examples
Formulas to quickly set device utilization and evaluate thermal effects when varying device, package or cooling parameters:

= INT(NUM_LUTS * 0.75) Sets total LUT utilization to 75% of device capacity (if entered on the Logic sheet)

= INT(NUM_DSPS * 0.90) Sets DSP block utilization to 90% of device capacity (if entered in DSP sheet)