This step walks you through the process of getting the display of static probability and toggle rate for a signal in the property window.
- Note the total power (Total On-Chip Power) in the Power Report Summary view.
- Click the Set/Reset item in the Power Report.
- Click on the dut/dut_reset
signal.
- Note that there is a Power view in the Net Properties window that displays the net properties
for the
dut/dut_resetsignal. Click on Load Power Properties to get the power information for the first time.
- Note that the Toggle
rate is 0% and the Static
probability is 0 for the
dut/dut_resetsignal, indicating that reset is always de-asserted in the design.