Open Source Bootgen for On-target Use for Zynq Devices, Versal ACAP, and Zynq UltraScale+ MPSoC - 2021.2 English

PetaLinux Tools Documentation: Reference Guide

Document ID
UG1144
Release Date
2021-10-27
Version
2021.2 English

If you want to build an open source bootgen as part of the root file system, follow these steps.

  1. Go to the PetaLinux project: cd <plnx-proj-root>
  2. Run petalinux-config -c rootfs and select Filesystem Packages > Bootgen
  3. Run petalinux-build.

    Once the target is up, you can find the bootgen binary in /usr/bin.