- To download a bitstream to target
board:
$ petalinux-boot --jtag --fpga --bitstream <BITSTREAM> --hw_server-url <hostname:3121>
- To download newly built <plnx-proj-root>/images/linux/u-boot.elf to target
board:
$ petalinux-boot --jtag --u-boot --hw_server-url <hostname:3121>
- To download newly built kernel to target board:
$ petalinux-boot --jtag --kernel --hw_server-url <hostname:3121>
- For
MicroBlaze™
processors, this boots <plnx-proj-root>/images/linux/system.bit, u-boot.elf,
linux.bin.ub, system.dtb, and rootfs.cpio.gz.u-boot on
target board.Note: If using a MicroBlaze processor, you need to add
--fpga
to thepetalinux-boot
command as shown in the following example:petalinux-boot --jtag --fpga --kernel --hw_server-url <hostname:3121>
- For Zynq® UltraScale+™ MPSoC, this boots <plnx-proj-root>/images/linux/pmufw.elf, zynqmp_fsbl.elf, u-boot.elf, Image, system.dtb, and ramdisk.cpio.gz.u-boot on target board.
- For Zynq-7000 devices, this boots <plnx-proj-root>/images/linux/zynq_fsbl.elf, u-boot.elf, uImage, system.dtb, and rootfs.cpio.gz.u-boot on target board.
- For Versal® ACAP, this boots <plnx-proj-root>/images/linux/BOOT.BIN, <plnx-proj-root>/images/linux/Image, <plnx-proj-root>/images/linux/ramdisk.cpio.gz.u-boot , and <plnx-proj-root>/images/linux/boot.scr on target board.
- For
MicroBlaze™
processors, this boots <plnx-proj-root>/images/linux/system.bit, u-boot.elf,
linux.bin.ub, system.dtb, and rootfs.cpio.gz.u-boot on
target board.
- To download a image with a bitstream with
--fpga --bitstream <BITSTREAM>
option:$ petalinux-boot --jtag --u-boot --fpga --bitstream <BITSTREAM>
The above command downloads the bitstream and then download the U-Boot image.
- To see the verbose output of JTAG boot with
-v
option:$ petalinux-boot --jtag --u-boot -v
- To download a customized U-Boot image with the
--u-boot
/--uboot
option:$ petalinux-boot --jtag --u-boot/--uboot <specify custom u-boot.elf path>
- To download a customized kernel image with
--kernel
:- For Zynq UltraScale+ MPSoC and Versal ACAP, use Image
-
$ petalinux-boot --jtag --kernel <specify custom Image path>
- For Zynq-7000 devices, use uImage
-
$ petalinux-boot --jtag --kernel <specify custom uImage path>
- For MicroBlaze processors, use linux.bin.ub
-
$ petalinux-boot --jtag --kernel <specify custom linux.bin.ub path>
- To download a customized dtb image with
--kernel
:$ petalinux-boot --jtag --kernel <specify custom kernel path> --dtb <specify custom dtb path>
- To download a customized dtb image with
--uboot
/--u-boot
:$ petalinux-boot --jtag --u-boot/--uboot <specify custom u-boot path> --dtb <specify custom dtb path>
- To download a customized pmufw image with
kernel:
$ petalinux-boot --jtag --kernel <specify custom kernel path> --pmufw <specify custom pmufw.elf path>