To monitor the current
electrical and temperature status, use the following
commands:
It
will generate an output similar to the following. For command details see the xbutil
documentation.xbutil examine --device <user BDF> --report thermal electrical--------------------------------------------------------
1/1 [0000:03:00.1] : xilinx_vck5000_gen3x16_xdma_base_1
--------------------------------------------------------
Thermals
PCB Top Front : 24 C
PCB Top Rear : 28 C
FPGA : 36 C
Electrical
Max Power : 225 Watts
Power : 25.839361 Watts
Power Warning : false
Power Rails : Voltage Current
12 Volts Auxillary : 24.376 V, 0.603 A
12 Volts PCI Express : 12.149 V, 0.917 A
3.3 Volts PCI Express : 3.279 V
3.3 Volts Auxillary : 3.327 V
Internal FPGA Vcc : 0.803 V, 48.000 A
DDR Vpp Top : 2.492 V
5.5 Volts System : 5.011 V
Vcc 1.2 Volts Top : 1.203 V
1.8 Volts Top : 1.803 V
0.9 Volts Vcc : 0.878 V
Mgt Vtt : 1.197 V
3.3 Volts Vcc : 3.270 V
Vcc 1.2 Volts i : 2.200 A
Vcc Auxillary : 1.508 V
Vcc Auxillary Pmc : 1.512 V
Vcc Ram : 0.800 V