The Windows 10 included RNDIS driver needs to be associated with the SmartLynq+ Module. These are the steps to associate the cable to the driver. You might need to repeat these steps if you connect the SmartLynq+ Module to a different port on the Windows PC.
- Connect the SmartLynq+ Module to a Windows PC using the USB-B cable.
- Open Device Manager. You should see a device named RNDIS.
- Right-click the RNDIS device and click Update Driver.
- A new window pops up. Click Browse my
computer for driver software.
.
- Click Let me pick from a list of
available drivers of my computer.
- Select Network adapters
from the list and click Next.
- Select Microsoft from the Manufacturer
list and select USB RNDIS Adapter from the
Model list. Click Next.
- You will now see an Update Driver
Warning. Click Yes to
proceed.
- You should now see the driver successfully installed.
- Open the Windows network connections panel.
- You should see a device with the description USB
RNDIS Adapter.
- Right-click this adapter and click Properties.
- Select Internet Protocol Version 4
(TCP/IPv4) from the list and click Properties.
- A new window pops up. Configure the network interface as follows and click
OK.
- You should now be able to access the SmartLynq+ Module at 10.0.0.2