Even when routing fails, the router continues and tries to provide a design that is as complete as possible to aid in debug. If the routing is not complete, you might have to intervene manually.
Use the report_route_status command to identify
nets with routing errors. For more information see section Routing in the
UltraFast Design Methodology Guide for FPGAs and SoCs
(UG949).
The router reports routing congestion during Route finalize. The highest congested regions are listed for each direction (North, East, South, and West). For each region, the information includes the dimensions in routing tiles, the routing utilization labeled "Max Cong," and the bounding box coordinates (lower-left corner to upper-right corner). The “INT_xxx” numbers are the coordinates of the interconnecting routing tiles that are visible in the device routing resource view.
| Command | Function |
|---|---|
| report_route_status | Reports route status for nets |
| report_timing | Performs path endpoint analysis |
| report_design_analysis | Provides information about congested areas |
For a complete description of the Tcl reporting commands and their options, see the Vivado Design Suite Tcl Command Reference Guide (UG835).