Editing Configurations - 2022.1 English

Vivado Design Suite User Guide: Dynamic Function eXchange (UG909)

Document ID
UG909
Release Date
2022-06-07
Version
2022.1 English

With a set of RMs defined within block designs, Configurations can be declared. Each Configuration is a combination of the static logic plus one RM per RP; each Configuration is a full design image.

While each Configuration can be created manually, the simplest path is to let Vivado create the minimum set of Configurations automatically. This is done by selecting the automatically create configurations link in the middle of this screen. This will create as many Configurations as necessary to ensure that all RMs are included at least once.
Tip: This option is only available if no Configurations have been defined yet.
Figure 1. Edit Configurations before Creating Any Configurations

If one BDC has more RMs than another, a graybox RM will automatically be used for any RP that has all its RMs covered by prior Configurations. These default Configurations can be modified or renamed, and additional Configurations may be created if desired.

Tip: Graybox modules are different than black box modules, as they are not truly empty. Graybox RM shave tie-off LUTs inserted to complete legal design connectivity in the absence of an RM and they ensure outputs do not float during operation. Vivado creates these by calling update_design -buffer_ports on selected modules.
Figure 2. Edit Configurations After Automatic Generation of Configurations
Note: If one RM is used in more than one Configuration, the implementation results may be different, as place and route is performed each time, but only if the RM was initially implemented in a child run. RM implementation results will be reused if they were originally done in the parent configuration. This allows the Vivado project to track dependencies between parent and child.