blocks - 2022.1 English

Bootgen User Guide (UG1283)

Document ID
UG1283
Release Date
2022-04-26
Version
2022.1 English

Syntax

  • For Zynq devices and Zynq UltraScale+ MPSoC:
                                                      
    [blocks = <size><num>;<size><num>;...;<size><*>] <partition> 
    
  • For Versal ACAP:
    { blocks = <size><num>;...;<size><*>, file=<partition> }

Description

Specify block sizes for key-rolling feature in encryption. Each module is encrypted using its own unique key. The initial key is stored at the key source on the device, while keys for each successive module are encrypted (wrapped) in the previous module.

Arguments

<size>
Specifies the size of blocks (in bytes).

Example

  • For Zynq® UltraScale+™ MPSoC:
    Sample BIF - test.bif                                          
    all:
    {
    	[keysrc_encryption] bbram_red_key
    	[bootloader,encryption=aes, aeskeyfile=encr.nky, 
    	destination_cpu=a53-0,blocks=4096(2);1024;2048(2);4096(*)]
    	fsbl.elf
    }
  • For Versal ACAP:
    all:
    {
    	id_code = 0x04ca8093
    	extended_id_code = 0x01
    	id = 0x2
    
    	metaheader
    	{
    		encryption = aes,
    		keysrc = bbram_red_key,
    		aeskeyfile = efuse_red_metaheader_key.nky,
    		dpacm_enable
    	}
    
    	image
    	{
    		name = pmc_subsys, id = 0x1c000001
    		partition
    		{
    			id = 0x01, type = bootloader,
    			encryption = aes,
    			keysrc = bbram_red_key,
    			aeskeyfile = bbram_red_key.nky,
    			dpacm_enable,
    			blocks = 4096(2);1024;2048(2);4096(*),
    			file = plm.elf
    		}
    		partition
    		{
    			id = 0x09, type = pmcdata, load = 0xf2000000,
    			aeskeyfile = pmcdata.nky,
    			file = pmc_data.cdo
    		}
    	}
    
    	image
    	{
    		name = lpd, id = 0x4210002
    		partition
    		{
    			id = 0x0C, type = cdo,
    			encryption = aes,
    			keysrc = bbram_red_key,
    			aeskeyfile = key1.nky,
    			dpacm_enable,
    			blocks = 8192(20);4096(*),
    			file = lpd_data.cdo
    		}
    		partition
    		{
    			id = 0x0B, core = psm,
    			encryption = aes,
    			keysrc = bbram_red_key,
    			aeskeyfile = key2.nky,
    			dpacm_enable,
    			blocks = 4096(2);1024;2048(2);4096(*),
    			file = psm_fw.elf
    		}
    	}
    
    	image
    	{
    		name = fpd, id = 0x420c003
    		partition
    		{
    			id = 0x08, type = cdo,
    			encryption = aes,
    			keysrc = bbram_red_key,
    			aeskeyfile = key5.nky,
    			dpacm_enable,
    			blocks = 8192(20);4096(*),
    			file = fpd_data.cdo
    		}
    	}
    }
Note: In the above example, the first two blocks are of 4096 bytes, followed by a block of 1024 bytes, and then the next two blocks are of 2048 bytes. The rest of the blocks are of 4096 bytes.