After the board design is fixed, you must ensure that the design stays
within the constraints identified for power, power delivery, timing, and pinout to
ensure the design meets your requirements. At a minimum, Xilinx recommends constraining the design for total power and providing
maximum ambient and Theta Ja for the most accurate estimation. Xilinx allows you to constrain both the device power and the power
delivery solution by combining the power supplies that are connected to the same
regulator and specifying the maximum current for the regulator. You can use report_power to check whether any supplies are
overutilized. For more information, see the
Vivado
Design Suite User Guide: Power Analysis and Optimization
(UG907).
Following are examples of device power constraints:
set_operating_conditions -process maximum
set_operating_conditions -ambient_temp 40
set_operating_conditions -thetaja 1.5
set_operating_conditions -design_power_budget 10.2