This example shows how to use RSA authentication.
all:
{
id_code = 0x04CA8093
extended_id_code = 0x01
boot_config {bh_auth_enable}
image
{
name = pmc_subsys, id = 0x1c000001
{type = bootloader,
authentication=rsa, pskfile = ./PSK.pem, sskfile = ./SSK2.pem, revoke_id = 0x2,
file = ./plm.elf}
{type = pmcdata, file = ./pmc_data.cdo}
}
metaheader
{
authentication=rsa,pskfile = ./PSK.pem, sskfile = ./SSK16.pem, revoke_id = 0x10,
}
image
{
id = 0x1c000002, name = ss_psm
{type = cdo,
authentication=rsa, pskfile = ./PSK1.pem, sskfile = ./SSK1.pem, revoke_id = 0x1,
file = ./lpd_data.cdo}
{ core = psm, file = ./psm_fw.elf}
}
image
{
id = 0x1c000000, name = fpd
{type = cdo,
authentication=rsa, pskfile = ./PSK1.pem, sskfile = ./SSK5.pem, revoke_id = 0x5,
file = ./fpd_data.cdo}
}
image
{
id = 0x1c000000, name = subsystem
{type = cdo,file = ./subsystem.cdo}
}
}